DKD Ikjot United | CNC Machines Building Division CNC Roll Turning Lathe | Turn Master 55300/ 55600 | A Preet Enterprises
Extra heavy duty one-piece construction featuring a high damping coefficient with minimal thermal deformation. The 4 bed design ensures optimum cutting conditions for heavy applications. The slideways, hardened by high frequency induction, offer ideal hardness characteristics. Hand scraped Turcite B ensures static as well as dynamic accuracy between all contact surfaces. Our highly rigid spindle features deformation resistance, powerful turning capability and rugged durability. DKD Ikjot United in-house manufactured extra heavy duty chucks, 630mm (25”)diameter, features rapid clamping and high accuracy. The two-step gearbox offers extraordinarily high torque during low speed machining for superior heavy duty cutting performance. Pre-loaded linear compact roller guides and spaciously dimensioned, pre-loaded ball screw drives 4-guide-way-design to allow passing by the tail stock with the turning saddle – more rigid design carriage guide ways special induction hardened and ground – to avoid any wear for long lifetime, extremely wide tailstock guide ways – chill hardened – to have low pressure per square mm. All structural components of the machine are made of stress-relieved and deformation-free. Contact surfaces are hand scraped to ensure minimum tolerance accumulation.
DKD Ikjot United Headstock & Spindle Capability
Manufactured in-house, incorporates high quality bearings sourced from Europe or Japan. The spindle is assembled into its finely board cast Iron housing in an air- conditioned clean room. Its design and precision manufacture ensure high accuracy and optimum cutting capability coupled with easy maintenance and low cost for service and spare parts. Low wear and high machining quality & spindle bearing for highest stiffness.
Working Range
The Turn Master 55300/55600, Foundation-free compact turning lathe for the effective and cost-efficient machining. Maximum job diameter : Ø 550 mm (22″) Maximum length between centre : 3,000/6,000 mm (118″/236”) Maximum workpieces up to 5,000/8,000 kg (11,025/17,640 lbs)
Specification | Turn Master 55300 | Turn Master 55600 |
CAPACITY | ||
Height of Centres Over Bed Guide Ways (mm) (inch) | 530(21”) | 530 (21”) |
Distance Between Centres (mm)(Inch) | 3000 (118”) | 6000 (236”) |
Swing With Telescopic Covers Over Bed Guide ways (mm) (inch) | 1000 (39”) | 1000 (39”) |
Swing Over Cross Slide (mm) (inch) | 550 (22”) | 550 (22”) |
Bed Width (mm) (inch) | 860 (34”) | 680 (34”) |
Number of Guide Ways | 4+1 | 4+1 |
Max Work Piece Weight Supported Between Centres Without Steadies (kg) (lbs.) | 5000 (11025) | 8000 (17640) |
Noise Level (dB) | < 80 | < 80 |
HEADSTOCK | ||
Spindle Nose (mm) (inch) | IKJOT Norm | IKJOT Norm |
Spindle Bore (mm) (inch) | 70-100 (2.76”-3.94”) | 70-100 (2.76”-3.94”) |
Inner Diameter of Front Bearing (mm) (inch) | 200 (7.87”) | 200 (7.87”) |
Spindle Main Motor (kW) | 43/70 | 43/70 |
Variation of RPM at Different Ranges | 1-200 | 1-200 |
4 Jaws Independent Chuck Steel Body (mm) (inch) | 630 (24.80”) | 630 (24.80”) |
TAILSTOCK | ||
Tailstock Travel (mm) (inch) | 1000-3000 (39.37” – 118.11”) | 1000-6000 (39.37” – 236.22”) |
Quill Travel (mm) (inch) | 200 (7.87”) | 200 (7.87”) |
Quill travel Control | Motorized | Motorized |
Tailstock Travel Control | Geared Type | Geared Type |
Z-AXIS | ||
Z-Travel (mm) | 500-3000 | 500-6000 |
Feed (mm/min) | 2-3000 | 2-3000 |
Rapid Traverse (mm/min) | 5000 | 5000 |
Actuator for Drive | A.C. Servo Motor | A.C. Servo Motor |
X-AXIS | ||
X-Travel (mm) (inch) | 340 (13.39”) | 340 (13.39”) |
Feed (mm/min) | 2-3000 | 2-3000 |
Rapid Traverse (mm/min) | 5000 | 5000 |
Actuator for Drive | A.C. Servo Motor | A.C. Servo Motor |
OVERALL DIMENSIONS AND WEIGHT | ||
Dimensions: Max. Length for the Configuration (mm) (inch) | 8000 (314.96”) | 11000 (433.07”) |
Dimensions: Max. Width (mm) (inch) | 2200 (86.61”) | 2200 (86.61”) |
Dimensions: Max. Height (mm) (inch) | 2500(98.43”) | 2500 (98.43”) |
Dimensions: Weight of Machine for the Standard (kg) | 12500 | 19500 |
CONTROL | ||
CNC Control | SIEMENS | SIEMENS |
Interface with Roll Database & Network Connection Full Library of Groove Profiles | DKD Solution | DKD Solution |
CNC Roll Lathe Rolls for Bar Rolling Mill
CNC Roll Lathe
CNC Roll Shop Equipments
CNC Roll Shop
CNC Roll Turning Lathe
CNC System for Roll Lathe
Heavy CNC Lathe
